TECHNICAL MANUAL Of Intel Cedar Trail-D & ICH10R Chipset Based Mini-ITX M/B for ATOM Processor NO. G03-NC9P-F Revision: 1.0 Release date: D
5Motherboard Jumper Position CASE_OPENJP2 JBATJP1
6Jumper Jumper Name Description JBAT CMOS RAM Clear Function Setting 3-Pin Block JP1 COM2 Port Pin9 Function Select 6-Pin Block JP2 MINIPCIE
7Headers Header Name Description FP-AUDIO Front Panel Audio Header 9-pin Block TPM TPM header 19-pin Block USB 2/3 Front Panel USB 2.0 Header 9
8Chapter 2 Hardware Installation 2-1 Jumper Setting (1) JBAT (3-pin): Clear CMOS 2-3 closed : Clear CMOSJBAT JBAT 131-2 closed: Normal;1 3 (2)
9(3) JP2 (3-pin): Mini PCI-E Power 3.3V/ 3VSB Function Select 2-3 closed:MINI PCI-E Power=3VSB JP2 JP21-2 closed:MINI PCI-E Power= VCC 3.3V; 1313
102-2 Connectors and Headers 2-2-1 Connectors (1) I/O Panel Connector: (2) ATX12V (4-pin block): ATX12V Type Power Connector
11(3) PWR (4-pin): SATA Power Out Connector Pin1 Pin N o. Definition 1 +12V 2 GND 3 GND 4 VCC (3) SATAII Port: S
12 (4) MSATA: Mini SATA/Mini PCI-E Selectable Connector MSATA slot can function as Mini-SATA connecter or full-size Mini-PCIE slot. When function as
13(2) TPM (19-pin): TPM Header 19 CLK VCC3.3LFRAME- RESET LAD3 GND VCC5V KEY/NC 2Pin 120 LAD2 LAD1 LAD0 GPIO SB 3.3V GND GND NC SERIRQ NC/G
14(4) JW-FP (9-pin): Front Panel Header (PWR LED/HD LED/Power Button /Reset) HDLED RESET HDDLED+ GND PWRLED+ PWRBTN GND PWRLED- HDDLED- RST
i Environmental Protection Announcement Do not dispose this electronic device into the trash while di
15 (6) PWR LED (3-pin): Power LED Header The Power LED is light on while the system power is on. Connect the Power LED from the system case to this
16 (8) CIR_CON (7-pin): CIR Header GND NC ATX 5VSB CIR LED VCC CIR _WB 2Pin 1CIR RX (9) NICLED (2-pin): LAN Activity LED Header Pin
17 (10) CPUFAN, SYSFAN1, SYSFAN2 (3-pin): FAN Header Pin1: GND Pin2: +12V fan power Pin3: Fan Speed SYSFAN2/SYSFAN1 Pin1Pin1CPUFAN1/
18Chapter 3 Introducing BIOS Notice! The BIOS options in this manual are for reference only. Different configurations may lead to difference in BIOS
193-2 BIOS Menu Screen The following diagram show a general BIOS menu screen: 3-3 Function Keys In the above BIOS Setup main menu, you can see
20z Press <Enter> to select. z Press <+>/<–> key when you want to modify the BIOS parameters for the active option. z [F1]: Pre
213-6 Main Menu Main menu screen includes some basic system information. Highlight the item and then use the <+> / <-> key or numerical k
223-7 Advanced Menu Launch External PxE OpROM Use this item to enable or disable boot option for legacy network devices. The optional settings are
23suspend button is pressed. The optional settings are: [Suspend Disabled]; [S3 (Suspend to RAM)]. S3 Video Repost Use this item to enable or disa
24The optional settings are: [Disabled]; [Enabled]. Set as [Enabled] for Windows XP and Linux (OS optimized for Hyper-Threading Technology) and [Disa
ii ENVIRONMENTAL SAFETY INSTRUCTION...
25USB hardware delays and time-outs: USB Transfer time-out Use this item to set the time-out value for control, bulk, and interrupt transfers. The
26Change Settings Use this item to select an optimal setting for super IO device. CIR Controller Use this item to enable or disable CIR controller.
27Use this item to set a degree for CPU / SYSFAN1/ SYSFAN2 to run at full speed when above the specific temperature set. CPUFAN / SYSFAN1 / SYSFAN2 I
28► South Bridge Press [Enter], user can have a view of SB Chipset Configuration and make settings for the following items: All USB Devices Use th
29The optional settings are: [Enabled]; [Disabled]. 3-9 Boot Menu Setup Prompt Timeout Use this item to set number of seconds to wait for setup acti
30 Boot Option Priorities This item is for user to set the system boot order from current available boot device. 3-10 Security Menu Security menu al
313-11 Save & Exit Menu Save Changes and Reset This item allows user to reset the system after saving the changes. Discard Changes and Reset Thi
iii Environmental Safety Instruction z Avoid the dusty, humidity and temperature extremes. Do not
iv USER’S NOTICE COPYRIGHT OF THIS MANUAL BELONGS TO THE MANUFACTURER. NO PART OF THIS MANUAL, INCLUDING
1Chapter 1 Introduction of the Motherboard 1-1 Feature of Motherboard z Intel® Cedar Trail-D + ICH10R chipset + NVIDIA® N13M-GE1-B GPU z Suppor
21-2 Specification Spec Description Design z Mini-ITX form factor; PCB size: 17.0x17.0cm Embedded CPU z Intel® Cedar Trail-D Processor Chipset z
3z PWRLED header x1 z Speaker header x1 z GPIO header x1 z CIR header x 1 z NICLED activity header x1 1-3 Layout Diagram Rear IO Diagram
4Motherboard Internal Diagram Notice! When installing only one SODIMM to the board, please always install it in SODIMM2 slot, otherwise system
Comments to this Manuals